Branch Cuts

A branch cut is a curve removed from the complex plane so that a multivalued function can be treated as single-valued on the remaining domain. The cut is a convention; the branch points and the sheet structure are the underlying analytic facts.

Branch cuts matter in quantum mechanics because square roots, logarithms, resolvents, Green functions, scattering amplitudes, and special functions often become multivalued after analytic continuation.

Multivalued Functions

Write a nonzero complex number as

$$z=re^{i\theta}, \qquad r>0.$$

The angle is not unique:

$$\theta \sim \theta+2\pi n, \qquad n\in\mathbb Z.$$

Therefore the logarithm has many possible values:

$$\log z = \ln r+i(\theta+2\pi n).$$

Similarly,

$$\sqrt z = \sqrt r\,e^{i(\theta+2\pi n)/2}$$

has two values, differing by a sign. Going once around the origin changes the square root to its negative.

Branches and Cuts

A branch is a single-valued choice of a multivalued function on a chosen domain. A branch cut is a curve removed from the plane to make such a choice possible.

For the principal logarithm, one common choice is

$$-\pi<\operatorname{Arg}z<\pi,$$

with a cut along the negative real axis. Then

$$\operatorname{Log}z = \ln\lvert z\rvert +i\operatorname{Arg}z$$

is single-valued on the cut plane.

The cut itself is not unique. One could instead cut along the positive real axis or along another ray from the origin. Different choices can be equally valid if used consistently.

Branch Points

A branch point is a point around which analytic continuation changes the value of the function. For $\log z$ and $\sqrt z$, the origin is a branch point. Infinity is also part of the branch structure for these functions.

The diagnostic is monodromy: continue the function around a closed loop. If the value changes after returning to the starting point, the loop enclosed a branch point.

For example,

$$z^{1/2} \longrightarrow -z^{1/2}$$

after one loop around $z=0$. A second loop returns to the original value.

Boundary Values Across a Cut

For the principal logarithm with the cut on the negative real axis, take $r>0$. Approaching the cut from above gives

$$\operatorname{Log}(-r+i0) = \ln r+i\pi,$$

while approaching from below gives

$$\operatorname{Log}(-r-i0) = \ln r-i\pi.$$

The discontinuity is

$$\operatorname{Disc}\operatorname{Log}(-r) = 2\pi i.$$

For the principal square root,

$$\sqrt{-r+i0} = i\sqrt r, \qquad \sqrt{-r-i0} = -i\sqrt r.$$

The two boundary values are different sheets meeting at the cut.

Cuts versus Singularities

A branch cut is not an isolated singularity. It is a bookkeeping device that prevents loops from changing the chosen branch. The branch point is the obstruction.

This distinction matters for contour integration:

• an isolated pole contributes a residue;
• a branch cut contributes an integral over the discontinuity across the cut;
• a branch point may require a small contour around it;
• a contour cannot be freely pushed across a cut without accounting for the jump.

This is why Residue Theorem does not by itself evaluate branch-cut integrals.

Riemann Sheets

A multivalued function can be represented as a single-valued function on a multi-sheeted surface. Each sheet corresponds to a consistent branch. Crossing a branch cut moves from one sheet to another.

For $\sqrt z$, there are two sheets. For $\log z$, there are infinitely many sheets. The branch cut is a way of drawing a boundary in one sheet; the full analytic continuation remembers the other sheets.

In scattering theory, the phrase “physical sheet” means the sheet reached from physical boundary values by the convention appropriate to the problem. Resonance poles often lie on an unphysical sheet reached by continuing through a branch cut.

Free-Particle Threshold

For relative motion with reduced mass $\mu$,

$$E = \frac{\hbar^2k^2}{2\mu},$$

so

$$k(E) = \frac{\sqrt{2\mu E}}{\hbar}.$$

The square root makes $E=0$ a branch point. The positive real energy axis is the physical continuum above threshold. Continuing around the threshold changes the sign of $k$ and therefore moves to a different sheet.

This is why the complex $k$ plane is often cleaner than the complex $E$ plane near a single nonrelativistic threshold. In the $k$ plane, the two energy sheets are unfolded.

Continuous Spectra and Resolvents

For a self-adjoint Hamiltonian, the resolvent

$$R(z) = (z-H)^{-1}$$

is analytic away from the spectrum. If $H$ has continuous spectrum on an interval, the resolvent has different boundary values above and below that interval:

$$R(E+i0), \qquad R(E-i0).$$

The continuum often appears as a cut in the spectral parameter. The discontinuity across the cut is tied to the spectral density. This is the operator-level version of why branch cuts represent continua rather than isolated states.

Scattering Poles and Sheets

Physical elastic scattering is measured on real positive energies, but poles associated with bound states, virtual states, and resonances are classified by analytic continuation.

For short-range one-channel scattering:

• bound states appear as poles on the physical sheet below threshold;
• virtual states appear on a different sheet near threshold;
• resonances usually appear as poles at complex energy on an unphysical sheet.

The pole location alone is not enough unless the sheet is specified. This is why scattering pages carefully distinguish bound states, virtual states, and resonances rather than calling every nearby pole a resonance.

Branch Cuts in Special Functions

Special functions often inherit branch cuts from their defining expressions or from analytic continuation of differential-equation solutions. Hypergeometric functions, Bessel functions of noninteger order, Legendre functions, logarithms in Green functions, and square roots in WKB formulas all require branch choices.

The practical questions are:

• where is the chosen cut;
• which side of the cut defines the physical boundary value;
• what is the discontinuity across the cut;
• which sheet contains the pole or saddle being discussed.

For calculation-heavy special-function pages, the branch convention should be stated before using continuation formulas.

Common Mistakes

• Treating the branch cut as unique rather than conventional.
• Forgetting that the branch point, not the drawn cut, is the intrinsic obstruction.
• Moving a contour across a branch cut without adding the discontinuity contribution.
• Applying residue formulas to a branch point.
• Referring to a pole without specifying the sheet when analytic continuation is involved.
• Using a square root or logarithm from software without checking its branch convention.
• Confusing an $i0$ boundary value with a small physical damping term in every context.

Cross-Links

• Analytic Functions
• Contour Integration
• Residue Theorem
• Complex Analysis Essentials
• Principal Value Distributions
• Green Functions
• Bound States and Scattering Poles
• Resonances
• Effective-Range Expansion
• Hypergeometric Functions

References

• L. V. Ahlfors, Complex Analysis, 3rd ed., McGraw-Hill, 1979.
• E. M. Stein and R. Shakarchi, Complex Analysis, Princeton University Press, 2003.
• J. W. Brown and R. V. Churchill, Complex Variables and Applications, 9th ed., McGraw-Hill, 2014.
• G. B. Arfken, H. J. Weber, and F. E. Harris, Mathematical Methods for Physicists, 7th ed., Academic Press, 2013.
• R. G. Newton, Scattering Theory of Waves and Particles, 2nd ed., Dover, 2002.
• J. R. Taylor, Scattering Theory: The Quantum Theory of Nonrelativistic Collisions, Dover, 2006.

Exercises

1. Show that one loop around the origin changes the sign of $\sqrt z$.

Solution

Write

$$z=re^{i\theta}.$$

Then

$$\sqrt z = \sqrt r\,e^{i\theta/2}.$$

After one loop, $\theta\mapsto\theta+2\pi$, so

$$\sqrt r\,e^{i(\theta+2\pi)/2} = \sqrt r\,e^{i\theta/2}e^{i\pi} = -\sqrt r\,e^{i\theta/2}.$$

The sign changes.

2. Compute the jump of the principal logarithm across the negative real axis.

Solution

For $r>0$,

$$\operatorname{Log}(-r+i0) = \ln r+i\pi,$$

and

$$\operatorname{Log}(-r-i0) = \ln r-i\pi.$$

Therefore

$$\operatorname{Disc}\operatorname{Log}(-r) = 2\pi i.$$

3. Why is $E=0$ a branch point for $k(E)=\sqrt{2\mu E}/\hbar$?

Solution

The square root changes sign after analytic continuation once around $E=0$. Since $k(E)$ is proportional to $\sqrt E$, going around the threshold sends $k$ to $-k$. Thus $E=0$ is a branch point connecting two sheets.

4. Why can a branch cut represent a continuum in a Green function?

Solution

For a continuous spectrum, the resolvent has different boundary values above and below the spectral interval. The discontinuity across that interval is tied to the spectral density. Unlike an isolated eigenvalue, which produces a pole, a continuum produces extended nonanalytic structure, naturally represented as a cut in the spectral parameter.

5. A resonance pole is reported at a complex energy, but no sheet is specified. What is missing?

Solution

The sheet of analytic continuation is essential. The same complex energy coordinate can represent different branches of the analytically continued amplitude. A resonance pole is usually on an unphysical sheet reached through a branch cut, while bound-state poles lie on the physical sheet below threshold. Without the sheet, the pole classification is incomplete.